Diatronik Support all renesas and Infineon airbag restore by OBD2 up to 2016
Diatronik Support Dash mileage correction via OBD2
Diatronik Support Airbag Calculator via USB
Diatronik have many more function like OBDII Diag, IMMO Tool, G-Prog in develop, will add later.
SBC Tool ABS/SBC System Repair Tool using DAS to check and diagnose the ABS/SBC system in Mercedes Benz's W211 and R230, there are faults showed: CODE C249F, OPERATING TIME OF COMPONENT A7/3 IS EXCEEDED (SBC HYDRAULIC UNIT).
This new ABS&SRS Reset Tool iLink410 is built to help the diagnosis of ABS and airbag faults and determine why the ABS&SRS warning light is on. Featured with ABS and SRS system diagnosis, ABS and SRS bi-directional tests, ABS bleeding, SRS reset , steering angle sensor calibration, Electronic parking brake reset functionalities and wide vehicle coverage, i410 is the perfect tool that professional mechanics can’t wait to have.
Airbag Resetting and Anti-Theft Code Reader
EIS Repair Tool for Mercedes Benz is used to repair Benz key failure that intermittently or permanently can not turn ignition on, including the key twist fixed, the key data code hopping, remote control can not be used, the ignition lock (EIS) can not diagnose and so on.
Audi-VW Airbag Reseter works without additional computer and trough car OBD II connector can erase airbag sensor "crash data" or only fault memory.
Reset Inspection and Oil Service work for BMW Mini & Rover 75 cars build after 2001 through OBD2,easy to practice.
We supply this tool with unlimited technical service, wholesale price and one year warranty.
Functions:Reset Inspection Intervall. Workable Model:Opel Astra build after 1998, Zafira build after 1998, Corsa build.
CG100-airbag tool exclusively designed to read Tricore MCU’s over CAN-bus.Supports Read/Write EEPROM function for secured and non-secured SAC-TC1766 SAC-TC1767 SAC-TC1796 SAC-TC1797 microcontrollers.comes with Mileage, DPF, ECU system time, ISN built-in calculators.Edit CRC Eeprom.
Airbag Universal Repair 2016 Version is the best software aimed at repair of an airbag ECU, accompanied by a graphical interface. It's very simple and intuitive.
Airbag Reseter works without additional computer and trough car OBD II connector can erase airbag sensor "crash data" or only fault memory.
Very simple user instruction: connect this tool to car OBD II connector.
Right red button is for airbag "crash data" erase.
Left yellow button is for erase airbag "fault memory" or "errors".
Gproglite SL does all MCUs R7F7, Renesas H8sx, MPC/SPC560x, NEC v850, works together with Diatronic.
iLink450 Full Service Tool is specially designed for professional technicians and body shops to service individual specialized systems. The functions include EPB, Oil Service, ABS&SRS reset, Battery Configuration, Steering Angle Sensor Calibration, DPF regeneration and Throttle body alignment .
The ATM adapter suppports:
- 35080 35160 DQW080 DQW160 35080V6 VP,
- parallel FLASH Zhiwei anti-theft cancellation,
- 8-pin chip,
- ATMEGA re-use
Attention :The ATM adapter cannot be used alone; it must be used together with CG100 PROG III Airbag Restore Devices.
Service Light Reset Tool for VW/Audi allows technicians to reset service lights, including airbag warning lights, on Audi and VW vehicles with this functionality, up to Model Year 2007.
New CG100 Airbag Restore Devices includes all functions of XC236x FLASH Programmer and Renesas Repair function.
Toyota vehicles prior to 2009 are equipped with a Tire Pressure Warming Reset that can be used for initialization. When the bottom is pushed and held for more than 3 seconds, the vehicles receivers are open and looking for the currently stored TPMS IDS.
What if there is a missing or broken sensor?
What if there are new sensors on the vehicle that haven’t yet been programmed?
This will cause these vehicles to become stuck in a loop, searching for TPMS IDS that are no longer there.
N2 USA has developed the Toyota Loop Reset tool to hands this issue.