Autel MaxiSys MS906BT is the latest addition to the MaxiSys product line of advanced wireless diagnostic devices. The device is based on the Android operating system featured with the best possible coverage of OE-level diagnostics and ECU coding capability
AUTEL MaxiSys MS906BT Advanced Wireless Diagnostic Devices
1. Language Supported:
2. One Year Free Update Online
, After one year, it is New MS906BT Update Service
3. Other Parts of MS906BT on Sale: Main Test Cable for MS906BT (SF208)
, and Autel MaxiSYS-VCI100 (MS906BT Bluetooth)
Top 7 reasons to get MaxiSys MS906BT:
- 1.The most extensive complete system coverage for more than 80 US, Asian and European makes and models
- 2. Support OE-level ALL MODULES diagnostics, ECU Coding, Key Coding
- 3.Exceptional OE-Level functionality from comprehensive OBDII diagnostics & services to advanced ECU coding
- 4.Smart AutoVIN technology for identifying vehicle easily
- 5.Instant remote control tech support anytime, anywhere
- 6.Supports 2 way connect: Wireless BT and USB:
- Wireless BT pairing is easier for the communication between the Display Tablet and the VCI device. The working range for BT communication is about 164 feet (about 50 m); this means you can perform vehicle diagnosis freely
- The USB cable connection is a simple and quick way to establish communication between the Display Tablet and the MaxiVCIV100.
- 7.MaxiSys MS906BT with Special Functions:
1. IMMO Service:
Disable a lost vehicle keys and program the replacement key fob.
2. Oil Reset Service:
Reset service mileage and service intervals for the Engine Oil Life system.
3. SAS Service:
Perform calibration for the Steering Angle Sensor and automatically cleared the fault memory.
4. DPF Regeneration Service:
Clear the blockage through continuous burning of the particulate matter captured in the DPF filter.
5. TPMS Service:
Quickly look up the tire sensor IDs from the vehicle's ECU,perform TPMS programming and reset procedures after tire sensors are replaced.
6. EPB Service:
Deactivate and activate the brake control system,assist with brake fluid control,open and close brake pads,and set brakes after disc or pad replacement,etc.
7. BMS Service:
Allow the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
8. ABS/SRS Services:
Perform various bi-directional test to check the operating conditions of both the Anti-lock Braking System and the Supplemental Restraint System,such as Automated Bleeding,Pump Motor Test,and checking Module information,etc.
MaxiSys MS906BT Features:
All System OE-Level Diagnosis
Read & Clear Codes on All Available Modules
- *Extraordinarily powerful Samsung Exynos Hexa-core processor
- *8.0” 1024x768 LED-backlit glossy Multi-Touch capacitive display with IPS technology for ultra-mobility
- *Internal reliable 32GB SSD for better performance
- *Built-in 8-megapixel rear camera with autofocus and flashlight
- *802.11b/g/n Wi-Fi to access your favorite web resources
- *Unique ergonomic design with rubberized outer protection and a rugged internal housing
- *Built-in rechargeable lithium-polymer battery for up to 14 hours of continuous operation
- *USB, audio and auxiliary ports make it easy to connect accessories
- *Open source Android Operating System for fast boot-up and multitasking
- *Easy and intuitive navigation makes finding what you need simple and fast
- *The most extensive complete system coverage for more than 80 US, Asian and European makes and models
- *Exceptional OE-Level functionality from comprehensive OBDII diagnostics & services to advanced ECU coding
- *Complete capabilities for codes, live data, active test, ECU information, adaptation, matching, coding etc.
- *Smart AutoVIN technolog
- y for identifying vehicle easily
- *Automatic system and software updates with real-time push message notifications via internet
- *Instant remote control tech support anytime, anywhere
- *Cloud-based MaxiFix online community provides a vast database of diagnostic and repair tips and proven filed fixes
- *Interactive Data Logging sessions enable direct contact with Autel Technical Support for first-hand troubleshooting of diagnostic bugs and errors
- *One-stop multitasking designed for ideal management of workshop operations to keep all data files, customer info, and vehicle records well organized
- *Enhanced wireless BT connectivity between the display tablet and VCI device allows greater mobility and ease at work
- *Convenient data management system for managing internal program applications and reviewing data
Autel MaxiSys MS906BT, as a professional scan tool and upgraded version of Autel MS906, it can access wirelessly via Bluetooth connection ALL available vehicle modules including but not limited to PCM, ECM, EPS, PDM, BCM, TPM, SCCM, RADIO and etc. With complete capability for codes, it can read and clear codes on all systems and subsystems and be able to show live PID data of multiple sensors in graph & text.
Bluetooth Wireless Diagnosis
The Autel MaxiVCI allows the bluetooth diagnostic scanner to communicate with the DLC via Bluetooth and lined USB connection. With an ultra long working range of about 164 feet (about 50m), you can perform vehicle OE-Level All Modules diagnosis and services remotely without worrying about the cable might not be long enough or the limited space and hot air in your car.
Bi-directional Control not only performs various bi-directional tests to check the operating conditions of ABS and SRS, but also applies to functions such as Component Test and Active Test, Actuator Test. Active Test is used to access vehicle-specific subsystem and component tests. During an active test, the tester outputs commands to the ECU in order to drive the actuators. This test determines the integrity of the system or parts by reading the engine ECU data, or by monitoring the operation of the actuators, such as switching a solenoid, relay, or switch, between two operating states.
AUTO VIN TECHNOLOGY
Autel MS906BT diagnostic system features the latest VIN-based Auto VIN Scan function to identify CAN vehicles in just one touch, which allows the technician to quickly detect vehicles, scan all the diagnosable ECUs on every vehicle and run diagnostics on the selected system.
Advanced ECU Coding Capability
Autel MS906BT automotive diagnostic tool with advanced ECU Coding function, which is one of the features not available in the MS906. ECU Coding allows you to establish a data link to the electronic control system of the test vehicle via the VCI device for vehicle diagnosis, service or coding. You can operate functional tests, retrieve vehicle diagnostic information such as trouble codes, event codes and live data, and perform ECU coding, for various vehicle control systems, such as engine, transmission, ABS and more.
Coding functions are usually used by advanced specialists. Coding is conditionally divided into two types:
The first is the computer coding during replacement, commissioning, used to install a new computer in the car. When performing the procedure, the computer is informed of vehicle's VIN, the configuration and other information necessary for correct operation.
The second is the coding of the computer for tuning the body electronics to the user, usually the BCM. The procedure will allow you to offer the customer individual customization of the car for him, locking the doors, setting alarms, the function "lead to home", setting the salon and outdoor lighting, etc
IMMO Keys/Key Fob
The IMMO service of MS906BT can disable a lost vehicle keys and program the replacement key fob. One or more replacement key fobs can be programmed.( Before programming,please check and erase the fault codes. )
Note: Key function is only available for most vehicles with low security level, not applicable to vehicles with high-level safety systems such as BMW,Benz
Digital and Graphical Display of Parameters
Using MaxiSys you can display the parameters of the system conveniently. Some parameters are more likely to be monitored in analog form, for example, pressure. Some parameters are more conveniently viewed in graphical form, by observing their change in time (potentiometers, oxygen sensor). Some parameters must be displayed in the graph to observe changes relative to each other (for example, air mass flow and engine speed). Only in MaxiSys all these ways of displaying are available for all parameters and all components, regardless of the makes and models of the car.
The actuators are not always visually visible or too complex to assess their performance with organoleptic (eyes, ears) methods through normal activation. That's why the test-components are implemented in MaxiSys scanners. Test-components will allow you to include special test modes in the computer, in which the electronic system itself creates conditions for verification and evaluates its results with further recommendations to the expert
Adaptation and Initialization
After replacement, for repair or cleaning of some sensors and many actuators of electronic systems, an adaptation or initialization procedure is required. When performing this procedure, the basic values of their work, the reference point, are established. In a modern car, there are many such elements that require similar procedures, which makes these functions vital for the service. In MaxiSys systems, these procedures are presented at the dealer level.
MaxiSys MS906BT Supported Vehicle list:
Acura, Daihatsu, Hyundai, Infinit, Kiat, Mazda, Nissan, Scion, Subaru, Toyota, Manhindra, Proton, Daewoo, Honda, HyundaiCV, Isuzu, Lexus, Mitsubishi, Samsung, Ssang Yong, Suzuki, Fuso, Perodua, Tata
VW, Abarth, AstonMartin, MINI, Sprinster, SKODA, Citroen, Fiat, Lancia, Maserati, Opel, Porsche, SAAB, Vauxhall, Seat, Bugatti, Audi, ForEU, BMW, Alfa, Benz, Maybach, Ferrari, Jaguar, Land Rover, Peugeot, Renault, Smart, Volvo, Lamborghini, Bentley, Rolls-Royce, VW CV, Dacia, LT3
Chrysler, Dodge, Ford, GM, JEEP
Comparison Between MS906BT and DS808
MS906BT includes Bluetooth communication (DS808 is hardline)
MS906BT comes with a full kit of OBDI cables for the older models
MS906BT gets software updates (specifically coding updates) earlier then DS808.
The software of the DS808 and MS906BT is very similar. So the DS808 is a great value for money option, but if you want better tool, choose Autel MS906BT.
Comparison for Autel Maxisys MS906 and MS906BT
MS906 has the same apperance with MS906BT, but MS906BT has several advantages than MS906:
1. MS906BT is installed Bluetooth, allowing diagnosis wirelessly.
2. MS906BT' s diagnostic coverage includes premium vehicle brands such as Maserati and Bentley, which would be required for high-end service shops.
3. MS906BT supports oscilloscope and digital inspection camera add-ons which are not supported by MS906.
4. Finally, MS906BT has the capability to perform coding for covered vehicles. MS906TS is added TPMS function based on MS906BT.
5. MS906BT has complete OEM-Specifc scanner Coverage!
Autel MaxiSys DS708 vs MS906 vs MS906 TS vs MS 906BT:
MaxiSys MS906BT Specifications:
MaxiSys MS906BT Package including:
||Android™ 4.4.2, KitKat
||Samsung Exynos T5260 6-Core Processor (1.3 GHz quad-core ARM Cortex-A7 + 1.7 GHz dual-core ARM Cortex-A15)
||2 GB RAM & 32 GB ROM
||8.0" LED capacitive touch screen with 1024x768P resolution
||Wi-Fi (802.11 b/g/n), USB: 2.0, Mini USB 2.0, Wireless BT V2.1+EDR, Class1, HDMI 1.4a, SD Card (support up to 32 GB)
||Rear-facing, 8.0 Megapixel, AF with Flashlight
||Gravity Accelerometer, Ambient Light Sensor (ALS)
||Microphone, Single Speaker, 3-Band 3.5 mm stereo/standard headset jack
|Power and Battery
||10,000 mAh 3.7 V lithium-polymer battery, Charging via 12 V AC/DC power supply
||12 V (9-35 V)
||-10 to 55°C (14 to 131°F)
||-20 to 70°C (-4 to 158°F)
|Dimensions (W x H x D)
||270.8 mm (10.0”) x 176.0 mm (6.9”) x 36.0 mm (1.4”)
||NW: 1.05 kg (2.3lb.)
Adaptor for Chrysler-16 (for NA only)
Quick reference guide
Adaptor for GM/Daewoo-12
Adaptor for PSA-2
Adaptor for Fiat-3
Adaptor for BMW-20
Adaptor for Benz-38
Adaptor for Kia-20
Adaptor for Mitsubishi/Hyundai-12+16
Adaptor for Nissan-14
Adaptor for Honda-3
Compact Disc (CD)
AC/DC External Power Adapter
Adaptor for Benz-14 (for EU only)
Adaptor for VW/AUDI-2+2
Mini USB Cable
[US/EU/UK Ship] Xhorse VVDI Key Tool Plus Pad Full ConfigurationAutel MaxiIM IM608 with XP400 and Gift G-BOX2 Shipping method and delivery time:US, UK ,RU Warehouse:
2-4 working days. We have stocked up hot sale items in US, UK ,RU Warehouse, Fast Delivery No Tax. But if overseas warehouse is sold out,we will send from Hongkong. Ship From UK, No TaxShip From US, No TaxDHL Shipping
: 2-4 working days. Usually we declare lower value on DHL invoice. If your address is remote area for DHL, customer will need to pay remote cost about 35USD or ship by EMS or YANWEN. Please leave message if you have any special requirement.Yanwen Express:
5-10 working days. No Tax or remote cost for European Countries.You can also visit our website by cellphone, more convenient.Top 10 reasons to buy in our chinacardiags website
1.Our website is 10 years old, and always online.
2.We are professional with these tools and a reliable company.
3.There are professional engineers on our team.
4.We have our own manufacturer.
Many customers buy from us, you can check the home page
, just rest assured to buy in our webiste.
7.Items are very good quality.
8.We package our items safely and securely.
9.Safe purchase, and your privacy is secure.
10.We provide one year warranty and free technical services.
Email: sales@ChinaCarDiags.com (Preferred, check almost every day)
SKYPE: ChinaCarDiag (Preferred, check almost every day)
Whatsapp: +8618223445829 (Preferred, check almost every day)
WeChat: seven424424 (Preferred, check almost every day)Online service supportWhatsapp Group:LLnn0gcToGG2UjpHuZmcpG