Product Description
The TOPDON BT100 delivers fast, accurate testing for 12V batteries, cranking systems, and charging systems—all in one compact, cost-effective device. Designed for both pros and DIYers, it combines dealer-level accuracy, versatile functions, and simple operation to make diagnostics easy. From routine battery health checks to troubleshooting failures and dashboard warnings, the BT100 gives users the clarity needed to solve problems quickly and confidently.
TOPDON BT100 12V Battery & System Tester
Product Introduction:
The TOPDON BT100 delivers fast, accurate testing for 12V batteries, cranking systems, and charging systems—all in one compact, cost-effective device. Designed for both pros and DIYers, it combines dealer-level accuracy, versatile functions, and simple operation to make diagnostics easy. From routine battery health checks to troubleshooting failures and dashboard warnings, the BT100 gives users the clarity needed to solve problems quickly and confidently.
Product Highlights:
- 12V Car Battery Tester
- Wide Application for cars, motorbikes, trucks, RVs, ATVs, SUVs, boats, yachts, lawnmowers, and even golf carts, without needing to charge the device first.
- 3 Testing Function: A battery health test will determine whether or not the battery is in excellent operating order. A cranking test will determine whether or not the electrical system has sufficient power to start the engine. Check to see that the charging current, rectifier diode, and generator are all functioning normally.
- Pinpoint Charging System Problems
- One Tester for All Lead-Acid 12V Batteries
- Clear Results, Anytime, Anywhere
- Languages: English, Spanish, French, German, Italian, Russian
- Warranty & Updates: 2-Year Warranty
Product Features:
Check Your Battery Before It Dies
A Minor Investment Saves You from Headache
Were you sitting in the car and wondering why you can’t start the car? The cause of this may be a flat battery.
Try this 12V car battery tester, so you can:
- Avoid failed cold-weather starting, and a roadside breakdown.
- Keep a close eye on battery status, and fix potential problems.
- Regular battery check to lengthen its lifespan; make sure it works at an optimum level.
- Save mechanic costs and many more.
What can TOPDON BT100 do?
- Wide Battery Coverage: works for 100 to 2000CCA regular flooded, AGM flat plate, AGM spiral, Gel, and EFB;
- Multiple Unit Systems: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB.
- Battery Health Test Result: SOH (state of health), SOC (state of charge), CCA value, voltage, internal resistance, etc.
- Cranking/Starting Test: predict if the battery will fail to crank/start a vehicle.
- Charging Test: helps determine if the output voltage of the generator, the rectifier diode, and the charging current is normal.
- 3-LED Indicators: easy to tell if battery’s good (Green), there’s a warning (Orange), or there’s a serious issue (Red).
- Convenient Test: support both in-vehicle and out-of-vehicle test; no need to remove the battery out of vehicle.
- Built-In Protection: polarity reverses connection protection with spark proof; no heat generated while operating, or cause battery discharge.
- Easy & Quick Operation: show concise suggestions in seconds (Good, Bad, Recharge, Replace), with menu buttons to navigate easily.
- Multilingual Menu: English, Russian, Spanish, French, Italian, German.
- Note: For load test, please connect the product to your car and ignite the car on.
- Cranking Test
- Charging Test
- Show Battery Health
- 6 Languages: English speakers, they can easily switch the function menu into Russian, Spanish, French, Italian, and German.
Cranking Test
If your battery is 4 or more years older, and it does not seem to crank your engine at a normal speed, you probably need a new battery.
This 12V battery tester can show you the cranking voltage, and the cranking time in milliseconds, to help predict if the battery will fail to crank/start the vehicle.
Loaded Voltage means the voltage measured when turning on on-board electrical appliances, such as headlights.
Unloaded Voltage means the voltage measured when turning off all the on-board electrical appliances.
Charging Test
Use this battery load tester to check if the generator provides sufficient power to the vehicle electrical system, and if the battery can hold the charge.
More data are also included: CCA value/rating, voltage, internal resistance, state of health (SOH), and state of charge.
State of health (SoH) is a figure of merit of the condition of a battery (or a cell, or a battery pack), compared to its ideal conditions.
Show Battery Health
This automotive alternator tester will display test results: “GOOD, BAD, REPLACE, or RECHARGE”, concise and easy to understand for your quick reference.
- GOOD BATTERY: Battery is in good condition, no worries!
- GOOD, CHARGING: Good battery but low voltage, charge before using.
- REPLACE: Battery almost reaches the end of the using life, please replace it for car running.
- BAD CELL, REPLACE: REPLACE: Battery is interior damaged, bad cell or short circuit, replace it.
- RETEST AFTER CHARGING: Low voltage, charge and retest to avoid error.
In / Out of Vehicle
This car battery tester has a fast scan time to run a battery system test to check battery overall health, and the status of your alternator and battery.
Stay Safe Always
The risk of causing damage tends towards zero when using this load tester.
At the end of the durable cable are larger-sized clamps than the competition for a more secure fit.
Easy Battery Tester
This entry-level auto battery analyzer is made for newbies, with helpful features such as extra-large clamps for a solid connection, intelligent LED status indicators for quick test, and 5 large keypad buttons that make the menu easy to scroll.
**Move off the clamps and wait for 2 minutes to do another test.
2 Test Methods
- In Vehicle – no need to remove the battery. You can directly check the vehicle battery under the hood.
- Out of Vehicle – can test the independent battery.
Can Work in Hot & Cold
You live in someplace where the weather is harsh? Then you need this durable car battery tester, which can stand the extreme cold and heat (operation temp. range: -4℉~140℉, -20℃~65℃).
Product Specifications:
Testing Range: 100-2000CCA 30-220Ah(GB)
Testing Voltage: 12V
Application: Flooded/AGM/Gel/EFB/VRLA
Battery Standard: CCA/CA/BCI/MCA/DIN/IEC/EN/SAE/JIS/GB
Ripple Test: Yes
12V Battery Test:
12V Cranking Test:
12V Charging Test:
Data Retrieve:
LCD Display: 2'' Backlit
Package includes:
1pc x BT100 main unit
1pc x User Manual










Shipping method and delivery time:US, UK ,RU Warehouse: 2-4 working days. We have stocked up hot sale items in US, UK ,RU Warehouse, Fast Delivery No Tax. But if overseas warehouse is sold out,we will send from Hongkong.
Ship From UK, No TaxShip From US, No TaxShip From EU, No Tax
DHL Shipping: 2-4 working days. Usually we declare lower value on DHL invoice. If your address is remote area for DHL, customer will need to pay remote cost about 35USD or ship by EMS or YANWEN. Please leave message if you have any special requirement.
Yanwen Express: 5-10 working days. No Tax or remote cost for European Countries.
Top 10 reasons to buy from chinacardiags.com website1.Our website is 12 years old, and always online.
2.We are professional with these tools and a reliable company.
3.There are professional engineers on our team.
4.We have our own manufacturer.
5.Fast delivery
6.Many customers buy from us, just rest assured to buy in our webiste.
7.Items are very good quality.
8.We package our items safely and securely.
9.Safe purchase, and your privacy is secure.
10.We provide one year warranty and free technical services.
Contact information:
Email:
sales@ChinaCarDiags.com Whatsapp:
+8618223445829 WeChat: seven424424
Whatsapp Group:LLnn0gcToGG2UjpHuZmcpG