XTOOL IP500 BMR Diagnostic Scanner A Comprehensive Diagnostic Solution for BMW, for MINI, and for Rolls-Royce

Product Description

XTOOL IP500 for BMW Scanner Full Systems Bidirectional Scan Tool 

Top Reasons to Get XTOOL IP500 for BMW Scanner
 

• Advanced ECU Coding for BMW
• ALL Reset for BMW/MINI/RR
• 3000+ Bi-directional Controls/Active Tests
• Full System Diagnostics with 4-Data Live Graphing
• Diagnostic Report & Coverage
•  23+ Service Functions
• CAN FD Protocol
• 15 Kinds of Language: English, Spanish, German, French, Italian, Finnish, Arabic, Japanese, Korean, Polish, Portuguese, Vietnamese, Russian, Simplified Chinese and traditional Chinese.(Please leave the S/N of machine to us to change language for you.)
• Lifetime Free Update

 

XTOOL InPlus 500- All Resets Functions for BMW/MINI/Rolls Royce
 

• ABS Bleeding (Save 100~300 Bucks): Have you ever experienced that your brake pedal was gradually sinking to the floor or becoming loose after repalced a front and rear brake job (with all new calipers, brake cylinder, brake line, or brake fluid)? Check to see if there is air entering when the brake system was opened for item replacement. To obtain a firm brake pedal, the air must be removed. This ABS scan tool will assist in bleeding the brakes, cycling the pump and valves during the bleeding process.
• Injector Coding (Save 100~300 Bucks): After the ECU or injector is replaced, XTOOL IP500 enables you to write the injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so that the cylinder can better identify injectors to more accurately control or correct cylinder fuel injection quantity.
• Battery Matching (Save 45~250 Bucks): Noticed your car system still treating the new battery like the old one? It's time to assess the battery charge state and register the replacement. Use this code scanner car diagnostic tool to reset on the monitoring unit of the vehicle battery, in which the original low battery fault information will be cleared and the battery matching will be done.
• Throttle Adaptation (Save 50~200 Bucks): Is your vehicle's throttle acting up, causing issues like sluggish acceleration, poor response, or an uneven idle? It is time to relearn the throttle's operating parameters and restore their optimal peformance. This scan tool can make initial settings to throttle actuators, so you'll have smooth driving after the throttle body has been replaced or cleaned.
• Crank Relearn (Save 80~200 Bucks): Struggling with rough idling or check engine lights after crankshaft repairs? Crank Relearn (or Crankshaft Position Relearn) is critical for recalibrating your engine’s timing after replacing sensors or rebuilding components. This XTOOL scanner tool effortlessly syncs the crankshaft position sensor with the ECU—restoring smooth operation and preventing misfires.
• Transmission Reset (Save 120~350 Bucks): Noticing sluggish shifts or delayed gear engagement? Transmission Reset (Adaptive Reset) clears old shift patterns from your ECU after repairs or part swaps. This scan tool reprograms your transmission’s adaptive memory—restoring factory-like responsiveness and extending its lifespan.

There are many more popular special features waiting for you to use!

NOTE: Function availability may vary based on the make, model, and year of your car.Message us before purchase to confirm compatibility for your vehicle.



ECU coding functions

it significantly enhances vehicle performance. XTOOL IP500-BMR automotive diagnostic tool allows for individual customization, enabling users to refresh hidden functions, disable unwanted features, and adapt data for specific components after repairs or replacements. Additionally, IP500 diagnostic scanner tool provides customized configurations for high-end models, helping to improve fuel efficiency and ensure safe driving.

• Module Identification and Configuration >> Allows users to identify and verify replaced modules by accessing the OEM server online, ensuring smooth communication of information.
• Function Activation >> Enables the activation of hidden features and advanced options that are typically not accessible through standard settings, enhancing the overall performance and convenience of the vehicle.
• Settings Adjustment >> Users can adjust vehicle settings according to personal preferences, such as comfort features, driving modes, and safety functions, to optimize the driving experience.
• Personalized Customization >> Through ECU coding, users can achieve personalized configurations for high-end models, enhancing the uniqueness and value of the vehicle.
• Disabling Unwanted Functions >> Disable distracting beeps or notifications, including seatbelt reminders, door ajar warnings, and other functions that may interrupt the driving experience.

 

XTOOL IP500-BMR All Systems Diagnoses

XTOOL IP500-BMR diagnostic tool can access all available system modules and read E*CU information to facilitate the vehicle diagnosis such as Engine, ABS, SRS, Transmission, TPMS, SAS, BMS, Steering, EPB, Chassis, Air Conditioning, etc. Some commonly used systems as follows:

 

• Check Engine System:  IP500-BMR diagnostic tool will read the fault codes, find the cause of the check engine light and point out the problems. This car scanner can show you the live data stream in a graph
• Diagnose ABS System: IP500-BMR diagnostic scanner checks all ABS to retrieve DTCs, views the live data, and offers you specific info of pending codes.
• Read SRS System: The IP500-BMR scanner reads the SRS information, detects existing problems to prompt a certain replacement or repair in time to ensure driving safety.
• Transmission System: This car diagnostic tool reads diagnostic codes from the transmission system and detects whether the car’s speed and load match its transmission’s power output.
• And more...

XTOOL IP500 full system diagnostic tool performs OE-level diagnostics, allowing you to read and clear trouble codes, view live data streams, conduct active tests, and retrieve ECU information. With these capabilities, you can achieve faster and more accurate test results across all electronic systems in your vehicle.

• Read Codes: Read the fault code, fault description, and fault code status within the selected module.
• Clear Codes: Clear the fault code in the selected module and turn off the fault light on the meter.
• Read Live Data: Reading all the data flow information contained within the selected module allows you to view the operating status of the selected system and helps in fault analysis.
• Read Freeze Frame: Accompanied by fault codes, record the state of fault codes appearing, to provide help for vehicle fault repair.
• Read E/CU Information: Read the version information, model information, etc. of the selected module.

XTOOL IP500-BMR Full OBD2 Functions:

• Reading Codes：Show the detailed description of the Diagnostic Trouble Code (DTCs)
• Erasing Codes & Reset：Turns off Check Engine Light (MIL), clears codes and resets monitors.
• Data Stream：Reads and displays live E###CU/PCM data stream, plotting functions graphically and stores freeze frame data.
• I/M Readiness Status：Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
• Read Live Data Stream：Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
• View Freeze Frame Data：Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
• O2 Sensor Test：Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
• On-Board Monitor Test：Retrieves and displays test results for emission-related powertrain components and systems.
• Read Vehicle Information：Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
• Component Test：Certain vehicle components can be actuated by commands sent from the scanner to test their operability

XTOOL IP500-BMR Provide Complete Active Test Function List:

XTOOL IP500 bidirectional scanner tools allow users to activate or control a vehicle system or component, it can send commands to the ECU, read ECU data to determine the integrity of the system or component, and monitor the operation of the components, letting you quickly understand whether a specific system, component or subsystem is operating normally,such as:

• EGR valve test
• injector buzz test
• open/close windows
• cooling fan test, operate mirrors, etc.

XTOOL InPlus IP500 23 reset functions 
 

• Oil Reset: Perform reset for a new countdown of engine oil life system once changed the oil.
• Electronic Park Brake Reset(EPB ): Maintain the electronic braking system safely and effectively.
• STEERING ANGLE SENSOR (SAS): Erase the fault steering angle sensor memories and make calibration for the Steering Angle Sensor.
• DPF Reset: Clear the blockage via the continuous burning of the particulate matter captured in the DPF filter.
• BMS Reset: Register the newly replaced car battery into the E###CU.
• Throttle Adaptation: The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.
• ABS Bleeding: Bleed the air out of the ABS system for firm brake pedals.
• Injector Coding: Code the new injectors after replacement for accurate fuel injecting control.
• Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality.  
• Suspension: After the air suspension module or other original parts are replaced and repaired, the suspension system is matched.

Newly added Reset Fucntions : Language Change,Transporte Mode, Window Initialization, Seat Calibration, Headlight, Start/Stop Reset, Nox Reset,etc.


 
4 In 1 Live Data Graph:
When using the function of reading data stream, InPlus IP500-BMR supports selecting 4 pieces of data at the same time to form a data flow chart, which is convenient for you to understand the status of each module more intuitively. Help you solve problems in a short time！

Battery Register
Streamline your vehicle's battery management by registering new batteries, allowing for accurate monitoring of battery status and performance, and enhancing overall vehicle efficiency.

Auto Vin + Auto Scan + Manual Selection：

• Auto VIN Scan XTOOL IP500-BMR diagnostic system features the latest VIN-Based Auto VIN Scan function to identify vehicles and scan all the diagnosable ECUs and run diagnostics on the selected system. This function is compatible with 2006 and newer vehicles.
• Manual VIN Input: For vehicles not supporting the Auto VIN Scan function, you may manually enter the vehicle VIN.
• Automatic Selection:The Auto VIN Scan can be selected after selecting the test vehicle manufacturer.
• Manual Selection:When the vehicle's VIN is not automatically retrievable through the vehicle's ECU, or the specific VIN is unknown, the vehicle can be manually selected.

Data Record & Playback
Capture and store diagnostic data during vehicle tests, enabling you to replay the information for detailed analysis and troubleshooting at your convenience.

Report Print & Share
Generate comprehensive diagnostic reports that can be printed or shared digitally, making it easy to communicate findings and collaborate on repairs with colleagues or clients.

 

 
Easy To Use

• Step 1 Plug into the OBD2 Port (16pin)

• Step 2 Turn on the car

• Step 3 Diagnosis with the scan tool
   

XTOOL IP500 for BMW Package List:

1* XTOOL IP500 for BMW OBD2 SCANNER
1* USB to Type-C Main Cable
1* VGA to OBD2-16 Main Cable
1* Quick Guide Package Listing

Email: sales@ChinaCarDiags.com     
Whatsapp: +8618223445829 
WeChat: seven424424 

Whatsapp Group:

LLnn0gcToGG2UjpHuZmcpG