VCX SE 6154 with Software SSD 256GB
Software pre-installed, you can use it directly
VCX SE support the car year 2001-2025 for VW(99% car model support)
Support to add other car license
Launch X431 ECU TCU Programmer with Gearbox Adapter Set
Autel Battery and Electrical System Analysis Tester MaxiBAS BT506 is a battery and electrical system analysis tool that uses as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a battery’s true health. The BT506 enables technicians to view the health status of the vehicle's battery and electrical system. Download the free and easy-to-use mobile app, available for iOS and Android devices, to use with the BT506 to perform testing and display test results.
Xhorse VVDI Super Chip Transponder for VVDI2. you can change to any type in the list:
11, 12, 13, PCF7935, PCF7936, PCF7937, PCF7938, PCF7939, PCF7946, 48, 4C, 4D, 4D(80), 4E, 8A, 8C, 8E
1. OBDSTAR X300 Classic G3 All-in-one Key Programmer with Fullly activated Cluster Calibration, ECU Cloning, Airbag Reset, Test Platform license
2. With free Key Sim Kit and Motorcycle IMMO Accessories(M034, M037, M040, M041, M042, M043, M053, M054)
3. 2 Years free update, wide coverage for Car, HD, E-Car, MOTO, Marine (jet-ski)
OBDSTAR DC706 ECU Tool Full Version Plus P003 Adapter and ECU Bench Cables for Reading BOSCH ECU Data CS PINCODE
Launch X431 PROS V5.0 is the upgrade of Launch X431 PROS V1.0, which is a new generation of 8-inch automotive intelligent diagnostic equipment with good hardware and super performance, which covers 98% of the market.
One Year Update Service for Autel DS808/DS808S Full Set Update Service (Subscription Only). It will need 1-3 days for the autel technician to do the update service, Very easy to operate, no shipping needed.
Choose one of the ECM, TCM or BCM clone module
ECU Clone/ All by OBD or Bench
ECU clone for cars and motorcycles
Autel MaxiIM IM608 PRO II (IM608 II/IM608S II) One Year Update Service
Xtool D9S PRO is updated version of Xtool D9 Pro.
ECU Programming for Benz/BMW/VW/AUDI/SKODA/FORD(off line)/MAZDA(off line)
Storage upgrade to 4+128GB
WIFI/wired connection
3 Years Free Update
GODIAG ECU GPT Boot AD Programming Adapter work with Godiag GT100 Openport
1. Support GPT to read and write data without disassembling the ECU.
2. Support ECU opening BOOT method to read and write data
3. Support ECU conversion to OBD2 mode to read and write data
One Year Update Service for Autel MaxiCheck MX808 (Subscription Only)
Autel G-box3 is a brand new key programming adapter for MaxiM series. It is the update version of G-box2. The G-Box3 is compatible with the Autel IM608Pro, IM608, and IM508 (with an additional purchase of XP400), offers faster and more secure reading and writing of Bosch EDC17, MEx17, MD1, and MG1 CUs and supports on-vehicle and on-bench Fast Mode in Mercedes-Benz All Keys Lost scenario.
One Year Update Service of Autel MaxiCheck MX808TS (Subscription Only)
GODIAG GT100+ GT100 Pro + BMW CAS4 CAS4+ FEM/BDC Test Platform Used with Xhorse VVDI2/Key Tool Plus Pad, Autel IM608, CGDI BMW
This update serive is suitable for Launch X431 Heavy Duty and X431 HD III (HD3) Module which free update service has been expired.
You can buy this service to extend another one year free update.
BMW BDC2 BDC3 BCP VAG MQB49 5C 5D Clamp Adapter
work with KD-X4 and KD-MAX and Other Devices
It’s one of the fastest tuning tools, and supports over 35000 ECU/TCUs.
Supports datalogging, OBD, Bench and Boot mode.
No subscriptions, with all updates free for life.
Yanhua ACDP-2 VW MQB IMMO KM Package with Module 33/34 for VW MQB48 & RH850 Key Programming Mileage Correction