[EU/UK Version] LAUNCH X431 PRO3 V+ Elite with LAUNCH X431 XPROG3

Product Description

EU/UK Version LAUNCH X431 PRO3 V+ Elite + LAUNCH X431 X-PROG 3

 

Top reasons to get LAUNCH X431 PRO3 V+ Elite:
 

• Upgraded with Smartlink C 2.0 adopts much more cars including NEVs （need to buy NEV software)
• supports local diagnosis and super remote diagnosis
• J2534 Programming
• support CAN 2.0/CANFD/DoIP 
• Topology Map 
• Through Pin Detection, technicians can access the voltage of OBDII diagnostic socket pins and supported protocols, so as to accurately determine the status of OBDII diagnostic interface.
• 60+ Reset Functions 
• D-PDU allows to access real-time ECU data, work efficiency in diagnosing and fixing faults; makes different devices compatible with each other.
• ECU coding, 3000+ active tests, OE-level all system scan, VAG guided functions, and more powerful features make for faster scan, more accurate diagnostics, and quicker car solution. All available on worldwide cars, stronger vehicle support>others.
• 2-Years Free Update, After 2 years, you can still use it without any limitation
• No IP limitation, Global Version
• Language Support: English,Simplified Chinese, Traditional Chinese, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Persian, Serbian, Finnish, Swedish, Czech, Italian
• VAG Guided Function
• Non-16pin Connectors & Cables Kit
• FCA AutoAuth Access: Bypass SGM in FCA vehicles seamlessly and within seconds; works on 2017 and later Chrysler, Dodge, Jeep, Alfa Romeo, Fiat, etc. *Need AutoAuth subscriptions.

Extension Modules:

1) ADAS Calibration Toolkit (ADAS Moblie/ ADAS PRO): Calibrate a wide range of camera-based & radar-based driver assistance systems
2) VSP60 Videoscope: inspect areas inaccessible;
3) X431 TSGUN/i-TPMS: full-capacity TPMS functions;
4) BST360 Battery Tester Bluetooth Battery Tester: test battery in-vehicle or out-of-vehicle;
5) X431 PROG3: key programming & ECU TCU cloning.
6) WiFi Printer: print out diagnostic data and information
7). X431 Heavy Duty Module: LAUNCH SmartLink C v2.0 Add-on Module is an essential truck module which can turn your X431 scan tools into full function heavy-duty truck diagnostic tools, working on both heavy-duty (Class 4 through 8) and medium-duty trucks (Such as heavy trucks, city buses, bulldozers, excavators, etc.)
8). IMMO Software Package: advanced key programming & IMMO service. (function is available with the new Smartlink, must use with X431 XPROG-3 GIII Key Matching will expand the anti-theft function just like IMMO PLUS)
9). Launch X431 key programmer: generate/copy remote transponder functions. (Direct connection, don't need OTG converter).
10) O2-2 Scopebox: detects high level faults on various electrical components, such as sensors, acturators and circuits.
11). S2-2 Sensorbox: diagnosing/testing/simulating most vehicle sensor faults
12). EV diagnostic kit for new new Energy Battery Vehicles
 

What Can We Do Through J2534 Programming?

• Program Blank ECU: match OE configurations with the software & settings after ECU replacement.
• Refresh the ECU: write new data and information into the used ECU to ensure proper running.
• Restore ECU Information: rest0re the original data if needed.
• Upgrade ECU Software: upgrade the software to the latest version.
• Through J2534, you can easily perform ECU programming for much more models (including Toyota, Honda, V.W, B.MW, F.ord, GM, Chrys1er, B.enz, etc.), getting in your bag OE functions of multiple brands.

Specification: 

Processor: 2.0GHz 4-core
Operating system: Android 10.0
Memory: 4GB
Storage: 64GB
Battery: 47.880Wh (7.6V, 6300mAH)
Display: 10.1 inches 1280*800
Camera: 8 million pixels
WIFI: 2.4GHz/5GHz (dual-band)
Interface: TYPE A *1 &TYPE C*1
Working temperature: 0~50℃
Size: 274*190.5*40.5mm
 

Advantages

1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).

2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.

3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.

4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.

5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.

6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).

Supported Brands

VW, Audi, Skoda, SEAT, BMW, Mercedes-Benz, Toyota… (updates to be continue)

Compatible With Multiple X-431 Series Diagnostic Tablet:

X431-Throttle, X431-Throttle III,  X431-Torque, X431-Torque III, X431-Turbo, X431-PAD II AE
X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII

X-PROG3 Features:

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.

2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.

3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.

4. Compatible with: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII

5. Reads & writes most Engine/Gearbox ECUs without disassembling the shell
 

Launch X431 XPROG3 Core Functions

1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.

2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.

3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).

4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;

5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.

6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.

7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.

8. Supports the BMW CAS4/CAS4+ module replacement.

9. Supports the ECU cloning and replacement for BMW Siemens engines.

10. Erase the password for Mercedes-Benz engine and gearbox within 3S.

11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.

Package List:

1set x LAUNCH X431 PRO3 V+ Elite
1set x Launch X-PROG 3

  Email: sales@ChinaCarDiags.com     
Whatsapp: +8618223445829 
WeChat: seven424424 

Whatsapp Group:

LLnn0gcToGG2UjpHuZmcpG